PORSCHE 987 TURBO KIT FOR
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,119.80
Make a selection
Silicone boost hose kit
FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's.
Facts:
tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit
Over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts.
Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.
Thi...(choose a part on the right to read more)
General Fitment 911 2005-08
Installation made easy! Replace worn hardware and gaskets with one of our prepackaged installation kits.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment CAYENNE 2007-10 CAYENNE 2003-06
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment CAYENNE 2007-10
From $132.47
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Installation made easy! Replace worn hardware and gaskets with one of our prepackaged installation kits.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 TURBO/GT2 2001-05
From $168.54
Make a selection
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 176kw (240hp) @ 6400rpm
Max. Torque - 270nm (199lbf ft) @ 4700-6000rpm
Max. Speed - 256km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.2s
Tuning:
Max. Power - 195kw (265hp) @ 6500rpm
Max. Torque - 295nm (218lbf ft) @ 5000-5500rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,358.90
Make a selection
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model recaro spg xl to floor on driver's side.
Installation: adapts GT3 seats to 944,964,965,993 for direct floor mount
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846r9042 adapter is required for installation. R-908x series seat mount kits provide an inboard seat belt mount. 846r9031 optional anti-sub strap mount for 846r908x series.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 944 1982-85 944 1985-88
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Material: typ 304, aus rostfreiem stahl.
Oberfläche: pulverbeschichtet in schwarz
Gewicht: 4 lbs.
Modelle: modell 846r9080 ermöglicht den einbau des Porsche GT3 sitzes auf der fahrerseite. Modell 846r9081-ermöglicht den einbau des Porsche GT3 sitzes auf der beifahrerseite
Installation: für den einbau der GT3 sitze in 996/997/Boxster für direkte boden-montage wird noch zusätzlich 846r9042( adapter) benötigt.
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation:...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 944 1982-85 944 1985-88
This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The fmdv008pa version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose.
Forge's recirculation valve features a greater flow rate than the OEM Bosch valve, as well as a faster response time, due to our revised design. By usi...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1985-88 944 1989-91
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity this bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit. For all 911, 912e, ...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 911 1984-86 911 1987-89 911 1978-83 930 1975-77 914 1970-76
Kit includes:
Software (fast load), sport air filter,complete " Brombacher" powerkit for 987
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s
Tuning:
Max. Power - 235kw (320hp) @ 6500rpm
Max. Torque - 365nm (269lbf ft) @ 5000-5500rpm
Max. Speed - 280km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management s...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,611.90
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s
Tuning:
Max. Power - 224kw (305hp) @ 6500rpm
Max. Torque - 345nm (254lbf ft) @ 5000-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,358.90
Make a selection
Kit includes:
Ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s
Tuning:
Max. Power - 215kw (293hp) @ 6500rpm
Max. Torque - 335nm (247lbf ft) @ 5000-6000rpm
Max. Speed - 271km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,153.90
Make a selection
Contitech timing belt kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Installers only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. From the belt to the tensioner and/or idler, all contitech timing belt kits contain only oe-quality components. In fact, many of our kits exceed OEM quality specifications.
Note: this kit is for vehicles with a 46 mm water pump roller; 924s (from manual engine #43h01919 and automatic engine 43h60384), 944 1982-86, and 944 turbo 1986
Timing belt kit contains:
(1) timing belt
(1) balance shaft belt
(2) tension rollers
(2) idle rollers
(1) mileage ...(choose a part on the right to read more)
General Fitment 944 1985-88 924 1986-88
The worldest largest aftermarket Porsche tuner, techart, has this front spoiler for the Porsche 996 turbo 01-05 and c4a 02-04.
Full front bumper with improved aerodynamics and adjustable splitter. Brake cooling kit & radiator ducting kit included.
General Fitment 911 TURBO/GT2 2001-05
$3,726.00
Make a selection
The worldest largest aftermarket Porsche tuner, techart, has this front bumper for the Porsche 996 turbo 01-05 and c4s 02-04.
Full front bumper comes with brak cooling & radiator duct kit, side air vents, and extended carbon wrap-around splitter. Made from kevlar glass composite.
General Fitment 911 TURBO/GT2 2001-05
$9,443.25
Make a selection
Smooth-fitting indoor car cover featuring full-color Porsche logo. Designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo.
Suitable for 911 GT2 (996). Also suitable for 996 turbo/turbo s with aerokit turbo, 996 Carrera with aerokit cup ii, and 996 Carrera 4s with aerokit Carrera 4s
General Fitment ACCESSORY
Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders have extremely high thermal resistance and are nikasil coated to reduce wear and friction. We also have the piston rings (sealing and oil scrapers) pre-installed to ensure reliability. Each of our piston and cylinder kits are complete and ready for installation. Features: mahle forged 935 3.0 l turbo pistons mahle nikasil coated cylinders increased 7:1 compression = greater acceleration 95 mm pistons / 95 mm finned wr group 0 cylinders piston rings pre-installed piston pins and circlips are included complete set of 6 - ready for installation made in Germany we recommend the complete engine gas...(choose a part on the right to read more)
General Fitment 911 1970-73
From $6,197.50
Make a selection
Complete modification kit for 2 doors including mounting hardware and bordeaux red door straps.
911 73 rs motorsport look.
Fits: turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1970-73
Mahle 4.1 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.1:1 compression. - 106 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. Water channels and case must be machined to fit. Please add the following to your order: 2 qty. Base gaskets, part # FVD10303905zfd 2 qty. Head gaskets, part # FVD10303905zkd 1 qty. O- ring base set, part # FVD10303905or 1 qty. O- ring head set, part # FVD10303905oro *please note: horsepower and torque gains depend on the softwa...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 TURBO/GT2 2001-05
From $8,474.70
Make a selection
Complete modification kit for 2 doors including mounting hardware. Motorsport look. Please indicate color for door loops.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77)
General Fitment 911 1994-98 911 1989-94 911 1970-73
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|